Description

MWF GE Fridge Water Filter



Replaces previous part numbers: GWF, GWFA, GWF01, GWF06, MWFA, SGF-G1, EFF-6013A, WSG-1 and Puretec RF10.



The MWF is a quality replacement filter that suits GE refrigerators which have a round, white, plastic filter. The filter is located inside the fridge, above the top shelf, at the back of the fridge.



Dimensions

Height: 13.3cm

Diameter: 8.9cm



Claimed efficiency:

Removes 99% or higher of: Lead, Asbestos, 99% of P-Dichlorobenzene, Cysts, Carbofuran, rust, dirt, sand, and sediment (0.5 to 1 micron in size); 94-97% of Mercury; 90% of Benzene and; 97% of Chlorine



Designed to improve the taste, quality, and colour of your water and ice that is dispensed from your GE fridge. Having a water filter built-in to your fridge helps to save you from buying bottled water, saving you money. Filter cartridges are engineered to protect the internal operations of your refrigerator from sediment, dirt, and the build-up of scale, as well as purifying your water supply to make it as clean as possible.



Refrigerator manufacturers strongly recommend that fridge water filters are replaced every six months, or as soon as the ‘change filter’ light appears either on the front display panel or near the filter cartridge casing in your refrigerator. However, if you notice that the clarity or the taste of your water has changed, or if the flow rate is significantly slower, this may be an indication that it is time for a new water filter. Replacing your water filter when this occurs ensures that your water remains fresh and that the ice and water mechanisms in your fridge are protected from any corrosion.



INSTALLATION



1.  Locate the existing filter at the back right hand corner of your fridge. Turn the filter anti-clockwise until you feel that it unlatch, and remove downwards.

2. Remove the top protective cover from the new filter

3. Fill the new filter with water from the tap.

4. Align the arrow on the filter, with the arrow on the filter head compartment.

5. Insert the filter into the filter head, and turn to clockwise until it latches.

6. Once the new filter is installed, flush the system by running about 5 litres of water through the fridge water dispenser, and discard the water.



Resetting the ‘change filter’ light:



To reset the ‘change filter’ light setting, press and hold the 'RESET FILTER' button on your fridge's control panel for 3 seconds.For further information, check Manufacturer's instructions.



Suits Models including: ZSEP420DWSS , ZSAS420DYSS , RCA24KGBFSS , PSE29NHWCSS , PFSE5NJYDSS , PFSA5NJZDSS , PFSA5NJZDSS , PFSA5NJZDSS , PFCE1NJYDSS , PFCA1NJZDSS , PFCA1NJZDSS , PFCA1NJZDSS , PCE23NHTFWW , PCE23NHTFSS , PCE23NHTFSS , PCE23NHTFBB , GHE25RGXFSS , GCE23LHWFSS , GCE21XGYFLS , GCE21XGYFLS , GCE21XGYFLS , GCE21XGYFLS , GCE21MGTFSS, GWF, GWFA, GWF01, GWF06, WR02X11020 MWFA, HWF, HWFA, SGF-G9, MWFP GCE21MGTAFSS , GCE21MGTAFSS, GCE21MGTBFSS, GCE21MGTBFSS, GSE25MGTBCSS, GSE25MGTBCSS, GSE25MGTECSS, GSE25MGTECSS, GSG25IB, GSG25IW, GSG25MIPFWW/BB, PCE23NHTAFSS, PCG21IBS, PCG21SIMFBS, PCG23IBS, PCG23SHMFBS, PCG23SHMFBS, PCP23, PFSA5NJZDSS, PIE23NGTAFBB, PIE23NGTAFKB, PIG21IBK, PIG21MIMFKB, PJE25PGTAFKB, PJE25PGTAFSV, PSE25SGTACSS, PSE29NHTACSS, PSE29NHWACSS, PSG22IBS, PSG22SIPFBS, PSG25IBS, PSG25SGMCBS, PSG29IBS, PSG29SHMCBS,pse29nhwicss PSG25SGMFCBS , ZSGS420DMASS, GCE21XGYDFLS,PSE25SGTCSS, PSG29SHSBCSS,PSG29SHSACBS, GCE21XGYBFLS